In Spaces Flex, in addition to ready-made modulation and decoration objects, it is also possible to work with specific parts, called obstacles. Obstacles are generic shapes that can be used in different situations. For example, to create a column in the room, or a strip on the wall, or a region on the floor.
To insert an obstacle into the environment, follow the procedures below:
Insert an Obstacle
1. To insert an obstacle, access the Floor Plan (1) menu and then click on Obstacles (2).
2. Select the obstacle you wish to add to your design and insert into the desired location.
| Note: Obstacles can be inserted in both 2D and 3D mode. Remember to change the mode whenever necessary. |
Moving an Obstacle
1. To move an obstacle, with the left mouse button pressed, move the mouse from one side to the other.
Changing the Measurements of an Obstacle
There are two ways to change the measurements of an obstacle: with and without precision.
Resizing with exact measurements
1. Click on the Obstacle you want to change and click on Dimensions (1).
2. Enter the desired measurements for Length, Depth, and Height (2).
Resizing without exact measurements
1. Select the Obstacle you want to adjust and click on Dimensions .
2. When accessing the Dimensions tool, four arrows will appear around the obstacle. Drag the arrow corresponding to the dimension you want to change.
| Note: This procedure can be done in both 3D and 2D mode. Remember to change the mode whenever necessary. |